====== Zaurus SL-C3100 Interaces ======

===== USB =====


===== CF =====


===== SD =====


===== Power =====

===== I/O =====

^ No. ^ Symbol ^ Function ^ IN/OUT ^ Description ^
| 1 | PWR | IN(+) | | Power supply to the device, + side |
| 2 | PWR | IN(+) | | Power supply to the device, + side |
| 3 | SD | Transmitted Data | OUT | Transmitted data |
| 4 | RD | Received Data | IN | Received data |
| 5 | RS | Request to send | OUT | Request to send data |
| 6 | CS | Clear to send | IN | Data transmission enabled |
| 7 | DR | Data set ready | IN | Data set ready |
| 8 | GND | Signal GND | GND | Signal GND |
| 9 | USB D+ | USB Data + (bi-directional) | IN/OUT | USB data signal, + |
| 10 | WakeUp | Sync signal | IN | Trigger signal for synchronization to PC |
| 11 | VCC | VCC | VCC | Power supply |
| 12 | USB D- | USB Data   (bi-directional) | IN/OUT | USB data signal, - |
| 13 | Reserve | Reserve | Reserve | Pulled down internally |
| 14 | ER | Data terminal ready | OUT | Data terminal ready |
| 15 | PWR  |GND | | Power supply to the device, - side |
| 16 | PWR  |GND | | Power supply to the device, - side |
| | FG | Frame GND | | | |

Connected pins on the SL-Cxx00 series are: 3,4,5,6,7,8,10,11,13 and 14. So only the serial / wakeup functions are supported on the new Zauris.

{{:z:16pin-spec.pdf|:z:16pin-spec.pdf}} 16 pin technical specification.

{{:z:tcx3104e.pdf|:z:tcx3104e.pdf}} Socket mechanical drawing.

{{:z:tcx3106e.pdf|:z:tcx3106e.pdf}} Plug mechanical drawing.